Offer links may be what's known as affiliate or referral links which provide us a commission for purchases.

STUVA / FRITIDS Loft bed / 4 drawer / 2 doors - white / light pink

5.0 /5 rating 1 vote

Find and buy at Amazon

Find and buy on eBay

Find and buy on Aliexpress

Order IKEA furniture assembly

Article number 792.686.56

Description

-This Loft bed provides a comprehensive solution for a child's room - including desk, wardrobe and shelving.

-You can set the table parallel or perpendicular to the bed, and also put it separately, by adding two ADILS legs (sold separately).

-If You set the table perpendicular to the bed, the wardrobe door can be installed both outside and inside the frame of the bed-loft.

-The Wire opening on the rear panel will be at hand, but not visible.

product dimensions

Table length: 155 see
Table width: 62 see
Table height: 74 see
Height: 182 cm
H svob space under furniture: 142 cm
Bed width: 99 cm
Bed length: 207 cm
Max load: 100 kg
Mattress length: 200 cm
Mattress width: 90 cm
Max. thickness of the mattress: 20 cm

Materials

Bed frame-cherd + table / mod d / xr:
Headboard / Footboard / Bedside / Shelf: Fiberboard, Chipboard, Paper, ABS plastic, Acrylic paint
Side: DVP, Chipboard, Plastic, Acrylic paint
Lower side rail / Ladder: Fiberboard, chipboard, ABS plastic, Acrylic paint
Reiki bed bottoms: Fiberboard, chipboard, Acrylic paint, Plastic
Stupa: Solid birch, Acrylic paint
Top panel / Bottom panel / Side panel / Back panel / Table top / Bottom: Fiberboard, Chipboard, Paper, Plastic, Acrylic paint
Partition: Fiberboard, chipboard, Paper, Plastic, Laminate (melamine), Acrylic paint
Base: Chipboard, Plastic, Laminate (melamine)
Panel / Back: Fibreboard, Chipboard, Paper, Plastic, Acrylic paint, Laminate (melamine)
Back of the base / front of the base: Chipboard, Plastic, Film, Laminate (melamine)
Bearing harness: MDF, chipboard, plastic, laminate (melamine), acrylic paint

A shelf:
Chipboard, Paper film, ABS plastic

Drawer without front:
Drawer back / Drawer side: Particleboard, Foil
Drawer bottom: Fibreboard, Acrylic paint

Rod Hanging:
Coil Rod: Steel, Epoxy / Polyester Powder Coating
Prop: Polypropylene

Door:
Door: Fibreboard, Acrylic paint
Handle: ABS plastic

Drawer front:
Front panel: Fiberboard, Acrylic paint
Handle: ABS plastic

Care instructions

Shelf / drawer without front panel / wardrobe bar / door / drawer front panel:
Wipe clean with a cloth dampened in a mild cleaner.

Bed frame-cherd + table / mod d / xr:
Wipe clean with a dry cloth.

Shelf / drawer without front panel / wardrobe bar / door / drawer front panel:
Wipe clean with a dry cloth.

Additional Information

The bottom of the bed is attached.
The ladder can be installed only on the right.
High beds, as well as the upper tier of 2-tiered beds and loft beds, are not suitable for children up to 6 years due to the risk of injury from falling.
The thickness of the mattress must be max. 20 cm and should not exceed the marking on / next to the stairs.
Do not install the hooks and handles bed or tie ropes or belts in which children can get confused. This can cause suffocation.
The required minimum ceiling height for assembly in a horizontal position - 244 cm vertically - 242 cm.
A shelf:
Suitable for recycling or energy recovery if it is provided in your area.
Drawer without front panel / wardrobe bar:
Suitable for recycling or energy recovery if it is provided in your area.

Prices in IKEA stores in different countries

The history of changes in the price of goods

The minimum price for an 0 $ product in equivalent was fixed to 2022-04-25 in the country: Hong Kong.
The maximum price of an 509.31 $ product was equivalent to 2019-07-31 in the country: Russia.
Price history is available from March 2019. The default graph shows the countries with the highest and lowest prices, as well as the user's country. To display on the graph of other countries, click on the name of the country of interest at the bottom of the graph. Prices on the chart are approximate, in US dollars.