IKEA DIY - Alterations furniture and IKEA
Stylish partition-rack
Date of publication: .
First we create a framework of wooden beams around the rack. Since EXPEDIT will be fully integrated in the partition, it should not stand on the floor, so the frame and have a rack. If the floor or other surface to which is attached the rough frame, you can align them with thick cement mortar.
Then proceed to the installation Drywall. Gently fasten sheets using a power screwdriver. To Shpatlevanie when there was no protrusions, screws are screwed deeper, as they must be to sink in drywall. After one side is ready to fill her seal with the proper size, and then finish the second side.
Plasterboard fixed? Well, then, should be thoroughly primed with our partition, and then zashpatlevat all seams. It is best to prime the two layers, the first - wipe cloth, and apply again the ground. Along the perimeter of the rack attach soft plastic corners to hide flaws and seams. Only then can we begin to stain the wall in any color you like. Краска applied three layers. More extravagant ladies can decorate partition cute ornament.
You can choose to turn the finished wall is also a source of lighting for both parts of the room. To do this, pick up the LED lamp on the top four shelves EKSPEDITa.
That's the way thanks to IKEA and its own ingenuity can transform a large room apartment in two cozy nest. Convenience is the partition that you can use the shelves on either side, so convenient to place them on a variety of decorative items like flower vases, figurines and other items.
Guest
Guest
Mihail1