IKEA DIY - Alterations furniture and IKEA
Stand for equipment for audiomanov
Date of publication: .
So, we need:
- Angle brackets - 10 pcs .;
- Ball-bearings - 4 pcs .;
- Miter saw;
- Drill or screwdriver;
- Drills on a tree.
Step №1. Measure all your audio equipment (height and width), as well as consider additional clearance for normal thermoregulation and ventilation.
Step №2. For each shelf will be used 4 legs, which comes with every pridivanny LACK table. Remains blocked shortened to the desired height. Carefully vymeryat lengths of the legs to match their level. Here's a hint: you can use electrical tape, wrapping her legs in the place where they will be shortened, and only then cut them off.
Step №3. The legs of one of the tables LACK we do not need, but they are worth saving, if in the future you decide to change the height of the shelves. Attach the ball rolls along the edges of the rack.
Step №4. Collect LACK tables according to the instructions, then make them in such a way as to get a rack. Make sure that the order complied with and reception takes as much space as planned.
Step №5. Disassemble the rack and secure each tier using angle brackets.
That's our ready stand for the equipmentEven correct to say - stand for the equipment and TV. This simple alteration, which is capable of any, even the most inexperienced owner.
Angelina
Vasilisa