Offer links may be what's known as affiliate or referral links which provide us a commission for purchases.
STUVA loft bed / 2 shelves / 3 shelves
Article number 292.687.67
Description
-This Loft bed provides a comprehensive solution for a child's room - including desk, wardrobe and shelving.
-You can set the table parallel or perpendicular to the bed, and also put it separately, by adding two ADILS legs (sold separately).
-If You set the table perpendicular to the bed, the wardrobe door can be installed both outside and inside the frame of the bed-loft.
-The Wire opening on the rear panel will be at hand, but not visible.
product dimensions
Table length: 155 see
Table width: 62 see
Table height: 74 see
Height: 182 cm
H svob space under furniture: 142 cm
Bed width: 99 cm
Bed length: 207 cm
Max load: 100 kg
Mattress length: 200 cm
Mattress width: 90 cm
Max. thickness of the mattress: 20 cm
Table width: 62 see
Table height: 74 see
Height: 182 cm
H svob space under furniture: 142 cm
Bed width: 99 cm
Bed length: 207 cm
Max load: 100 kg
Mattress length: 200 cm
Mattress width: 90 cm
Max. thickness of the mattress: 20 cm
Materials
Bed frame-cherd + table / mod d / xr:
Headboard / Footboard / Bedside / Shelf: Fiberboard, Chipboard, Paper, ABS plastic, Acrylic paint
Side: DVP, Chipboard, Plastic, Acrylic paint
Lower side rail / Ladder: Fiberboard, chipboard, ABS plastic, Acrylic paint
Reiki bed bottoms: Fiberboard, chipboard, Acrylic paint, Plastic
Stupa: Solid birch, Acrylic paint
Top panel / Bottom panel / Side panel / Back panel / Table top / Bottom: Fiberboard, Chipboard, Paper, Plastic, Acrylic paint
Partition: Fiberboard, chipboard, Paper, Plastic, Laminate (melamine), Acrylic paint
Base: Chipboard, Plastic, Laminate (melamine)
Panel / Back: Fibreboard, Chipboard, Paper, Plastic, Acrylic paint, Laminate (melamine)
Back of the base / front of the base: Chipboard, Plastic, Film, Laminate (melamine)
Bearing harness: MDF, chipboard, plastic, laminate (melamine), acrylic paint
A shelf:
Chipboard, Paper film, ABS plastic
Headboard / Footboard / Bedside / Shelf: Fiberboard, Chipboard, Paper, ABS plastic, Acrylic paint
Side: DVP, Chipboard, Plastic, Acrylic paint
Lower side rail / Ladder: Fiberboard, chipboard, ABS plastic, Acrylic paint
Reiki bed bottoms: Fiberboard, chipboard, Acrylic paint, Plastic
Stupa: Solid birch, Acrylic paint
Top panel / Bottom panel / Side panel / Back panel / Table top / Bottom: Fiberboard, Chipboard, Paper, Plastic, Acrylic paint
Partition: Fiberboard, chipboard, Paper, Plastic, Laminate (melamine), Acrylic paint
Base: Chipboard, Plastic, Laminate (melamine)
Panel / Back: Fibreboard, Chipboard, Paper, Plastic, Acrylic paint, Laminate (melamine)
Back of the base / front of the base: Chipboard, Plastic, Film, Laminate (melamine)
Bearing harness: MDF, chipboard, plastic, laminate (melamine), acrylic paint
A shelf:
Chipboard, Paper film, ABS plastic
Care instructions
A shelf:
Wipe clean with a cloth dampened in a mild cleaner.
Wipe clean with a dry cloth.
Bed frame-cherd + table / mod d / xr:
Wipe clean with a dry cloth.
Wipe clean with a cloth dampened in a mild cleaner.
Wipe clean with a dry cloth.
Bed frame-cherd + table / mod d / xr:
Wipe clean with a dry cloth.
Additional Information
The bottom of the bed is attached.
The ladder can be installed only on the right.
High beds, as well as the upper tier of 2-tiered beds and loft beds, are not suitable for children up to 6 years due to the risk of injury from falling.
Do not install the hooks and handles bed or tie ropes or belts in which children can get confused. This can cause suffocation.
The required minimum ceiling height for assembly in a horizontal position - 244 cm vertically - 242 cm.
A shelf:
Suitable for recycling or energy recovery if it is provided in your area.
The ladder can be installed only on the right.
High beds, as well as the upper tier of 2-tiered beds and loft beds, are not suitable for children up to 6 years due to the risk of injury from falling.
Do not install the hooks and handles bed or tie ropes or belts in which children can get confused. This can cause suffocation.
The required minimum ceiling height for assembly in a horizontal position - 244 cm vertically - 242 cm.
A shelf:
Suitable for recycling or energy recovery if it is provided in your area.
Prices in IKEA stores in different countries
The history of changes in the price of goods
Since March 2019, from which the price history has been tracked, the goods have not been sold in any of the countries in which IKEA is present.
Similar items
STUVA / FRITIDS Loft bed / 4 drawer / 2 doors - white / white
SKU: 592.621.65
This loft bed provides a comprehensive solution for a child's room - including desk, wardrobe and shelving.
STUVA / FRITIDS Loft bed / 3 drawer / 2 doors - white / green
SKU: 592.677.47
This loft bed provides a comprehensive solution for a child's room - including desk, wardrobe and shelving.
SVERTA frame loft bed
SKU: 103.061.42
You can use the space under the bed for the organization of the workplace, adding frame SVERTA countertop or chair put there to get cozy sitting area.
Feedback (0)