Offer links may be what's known as affiliate or referral links which provide us a commission for purchases.
STUVA / Foglia Bed-loft with 2yaschikami / 2dvermi
Article number 292.296.91
Description
-This Loft bed provides a comprehensive solution for a child's room - including desk, wardrobe and shelving.
-You Can set the table parallel or perpendicular to the bed and put separately, adding two legs ADILS.
-If You set the table perpendicular to the bed, the wardrobe door can be installed both outside and inside the frame of the bed-loft.
-Special grooves along each step prevent slipping.
-The Wire opening on the rear panel will be at hand, but not visible.
product dimensions
Height: 193 cm
Bed width: 99 cm
Bed length: 207 cm
Mattress length: 200 cm
Mattress width: 90 cm
Bed width: 99 cm
Bed length: 207 cm
Mattress length: 200 cm
Mattress width: 90 cm
Materials
Bed frame-cherd + table / mod d / xr:
Headboard / footboard / Sidewall of bed / Frame / Shelf: Fibreboard, Particleboard, Paper, ABS plastic, Film, Acrylic paint
Bottom of the bed: Fibreboard, OSB-plate, ABS plastic, Foil, Acrylic paint
Stairs: Particleboard or Fibreboard, ABS plastic, Film, Acrylic paint
Stupa: Solid birch, Acrylic paint
Structural support: Galvanized steel
Rod Hanging:
Clothes rail: Steel, Pigmented powder coating based on epoxy / polyester
Prop: Polypropylene
A shelf:
Particleboard, Foil, ABS plastic
Drawer without front:
Main parts: Particleboard, Foil
Drawer bottom: Fibreboard, Acrylic paint
Door:
Main parts: Polypropylene, Clear acrylic lacquer
Paper: Paper
Door: Particleboard, Foil, Foil
Drawer front:
Main parts: Polypropylene, Clear acrylic lacquer
Paper: Paper
Front: Particleboard, Foil, Foil
Headboard / footboard / Sidewall of bed / Frame / Shelf: Fibreboard, Particleboard, Paper, ABS plastic, Film, Acrylic paint
Bottom of the bed: Fibreboard, OSB-plate, ABS plastic, Foil, Acrylic paint
Stairs: Particleboard or Fibreboard, ABS plastic, Film, Acrylic paint
Stupa: Solid birch, Acrylic paint
Structural support: Galvanized steel
Rod Hanging:
Clothes rail: Steel, Pigmented powder coating based on epoxy / polyester
Prop: Polypropylene
A shelf:
Particleboard, Foil, ABS plastic
Drawer without front:
Main parts: Particleboard, Foil
Drawer bottom: Fibreboard, Acrylic paint
Door:
Main parts: Polypropylene, Clear acrylic lacquer
Paper: Paper
Door: Particleboard, Foil, Foil
Drawer front:
Main parts: Polypropylene, Clear acrylic lacquer
Paper: Paper
Front: Particleboard, Foil, Foil
Additional Information
The bottom of the bed is attached.
The ladder can be installed only on the right.
High beds, as well as the upper tier of 2-tiered beds and loft beds, are not suitable for children up to 6 years due to the risk of injury from falling.
The thickness of the mattress must be max. 20 cm and should not exceed the marking on / next to the stairs.
Do not install the hooks and handles bed or tie ropes or belts in which children can get confused. This can cause suffocation.
The required minimum ceiling height for assembly in a horizontal position - 244 cm vertically - 242 cm.
Rod Hanging:
Suitable for recycling or energy recovery if it is provided in your area.
Shelf / drawer without front panel:
Suitable for recycling or energy recovery if it is provided in your area.
Door / drawer front:
The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
The ladder can be installed only on the right.
High beds, as well as the upper tier of 2-tiered beds and loft beds, are not suitable for children up to 6 years due to the risk of injury from falling.
The thickness of the mattress must be max. 20 cm and should not exceed the marking on / next to the stairs.
Do not install the hooks and handles bed or tie ropes or belts in which children can get confused. This can cause suffocation.
The required minimum ceiling height for assembly in a horizontal position - 244 cm vertically - 242 cm.
Rod Hanging:
Suitable for recycling or energy recovery if it is provided in your area.
Shelf / drawer without front panel:
Suitable for recycling or energy recovery if it is provided in your area.
Door / drawer front:
The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
tags
2-bunk beds and loft beds, white, Loft beds, Bed-loft with 2yaschikami_2dvermi, Bedroom, STUVA _ FogliaPrices in IKEA stores in different countries
The history of changes in the price of goods
Since March 2019, from which the price history has been tracked, the goods have not been sold in any of the countries in which IKEA is present.
Similar items
STUVA loft bed / 4 box / 2 door - White / Pink
SKU: 992.271.94
This loft bed provides a comprehensive solution for a child's room - including desk, wardrobe and shelving.
STUVA / FRITIDS Loft bed / 4 drawer / 2 doors - white / red
SKU: 892.621.83
This loft bed provides a comprehensive solution for a child's room - including desk, wardrobe and shelving.
STUVA loft bed / 2 shelves / 3 shelves
SKU: 292.687.67
This loft bed provides a comprehensive solution for a child's room - including desk, wardrobe and shelving.
SVERTA frame loft bed
SKU: 003.939.36
You can use the space under the bed for the organization of the workplace, adding frame SVERTA countertop or chair put there to get cozy sitting area.
Feedback (0)